OPPO Digital BDP-93 사용자 설명서

PIN (Personal Identification Number)

PBC (Push Button Connection)

Please Enter the security PIN shown below into the software control panel of your 

wireless router or access point, then click the “NEXT” button below

WPS (Wi-Fi Protected Setup)

PIN code :  Your-PIN

Refresh

Previous

Next

 

 
 

9

  PIN – To configure the WPS using a Personal Identification Number. BDP-

93 will generate a PIN and you need to input it into the software control 
panel of your wireless router or access point. Please follow the on-screen 
instructions. 

9

  PBC - To configure the WPS using Push Button Control. You need to push 

a PBC button on your wireless router or access point to initiate the 
wireless connection. Please follow the on-screen instructions. 

 

is short for Service Set Identifier. It is an identifier for each wireless router or 

access point, and is also referred as a network name.   
 
WPS

 is short for Wi-Fi Protected Setup (WPS). It is the latest standard for easy and 

secure wireless home network configuration. It is also named Wi-Fi Simple Config. 
To use WPS, a WPS compatible router or access point is required. 

 

6.  IP Setting: To determine how the player obtains its IP address.  The available options are: 
 

•  Auto (DHCP) - The player automatically obtains its IP address information using DHCP 

(Dynamic Host Configuration Protocol).  This is the default setting.  In most cases, 
automatic IP configuration can be used.   

•  Manual – Manually enter the numeric IP address information.  Set the IP configuration 

manually only when the router has no DHCP server functions or when the router’s DHCP 
server function is disabled.  For more information on how to manually configure the Internet 
connection and what values to use, please consult your broadband router/modem 
instruction manuals or call your Internet service provider. 

•  Internet Connection – Depending on your choice in “Internet Connection” option, this 

can be “Wireless” or “Ethernet”.   

•  IP Address: The Internet Protocol address of the player.  When “IP Setting” is set to 

“Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be 
changed.  

•  Subnet Mask: Each IP address has an associated subnet mask.  It is used by the 

player to decide whether to route network traffic through the router or directly to another 
device on the same network.  When “IP Setting” is set to “Auto (DHCP)”, the value 
displayed here is obtained using DHCP and cannot be changed. 

•  Gateway: The IP address of the router.  It is also called “default gateway” or “default 

router”.  When “IP Setting” is set to “Auto (DHCP)”, the value displayed here is 
obtained using DHCP and cannot be changed.