Hunter Fan 42887-01 사용자 설명서

42887-01  •  11/30/09  •  Hunter Fan Company

7’ Minimum 

Blades to 

Floor

8’ Minimum 

Ceiling 

Height

30” From 

Wall or 

Nearest 

Obstruction

Proper ceiling fan location and attachment to the building 
structure are essential for safety, reliable operation, maximum 
efficiency, and energy savings.
Choose a fan site where:
• No object can come in contact with the rotating fan blades during 

normal operation.

• The fan blades are at least 7 feet above the floor and the ceiling is 

at least 8 feet high.

• The fan blades have no obstructions to airflow, such as walls or 

posts, within 30 inches of the fan blade tips.

• The fan is directly below a joist or support brace that will hold the 

outlet box and the full weight of the fan.

If you want to use an existing fan site, complete the following checklist to 

determine if the site is acceptable and safe for your new Hunter fan. If you 

cannot check off every item, prepare a new fan site as described on this 

page.
Fan Support System
• Fan attaches directly to building structure.
• Fan support system will hold full weight of the fan and light kit.
Ceiling Hole
• The outlet box clearance hole is directly below the joist or support brace.
Outlet Box
• The outlet box is an UL-approved octagonal 4” x 1-1/2” outlet box (or as 

specified by the support brace manufacturer).

• The outlet box is secured to the joist or support brace by wood screws 

and washers through the inner holes of outlet box.

• The outer holes of the outlet box are aligned with joist or support brace.
• The bottom of the outlet box is recessed a minimum of 1/16” into 

ceiling.

Wiring
• The electrical cable is secured to outlet box by an approved connector.
• Six inches of lead wires extend from outlet box.
If your existing fan site is suitable, skip ahead to Section 2 • Installing the 

Fan Support 

System

Fan Support 

System

Wiring

Outlet Box