Hunter Fan 41922-01 사용자 설명서

Hunter Fan Company 

41922-01 • 02/22/06

41922-01 • 02/26/07

Hunter Fan Company

1. Turn power on, replace fuse, or reset breaker.
2. Loosen canopy, check all connections according to the wiring the 

fan section.

3. Check the plug connection in the switch housing.
4. Push motor reversing switch fi rmly left or right to ensure that the 

switch is engaged.

5. Remove the shipping bumpers.
6. If the transmitter LED light does not come on, replace the battery 

with a new 12-volt alkaline battery. If the LED light does come on 
but the fan will not work, check the settings in the receiver and 
transmitter. Refer to 4• Setting the Remote Transmitter and 
Receiver for more information.

1. Tighten the blade bracket screws until snug.
2. Tighten the blade screws until snug.
3. Check to see if the blade is cracked.  If so, replace all the blades.
4. Be sure that the glass is secure.

1. If your fan wobbles when operating, use the enclosed balancing kit 

and instructions to balance the fan.

2. Tighten all blade and/or blade iron screws.
3. Turn power off , support fan very carefully, and check that the 

hanger ball is properly seated.

If you need parts or service assistance, please call 
888-830-1326 or visit us at our Web site at 
http://www.hunterfan.com.

Hunter Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114