Hearth & Home Technologies SL-750TV-IPI-D 사용자 설명서

다운로드
페이지 53
Heat & Glo  •  SL-550 / 750 / 950TV-D  •  2053-985 Rev. H  •  9/06
16
A.  Installing Outside Air Kit Damper Assembly
Appliance Preparation
7
CAUTION
Sharp Edges
•  Wear protective gloves 
and safety glasses dur-
ing installation.
Asphyxiation Risk.
Fire Risk.
Do NOT draw outside combustion air from:
• Wall, fl oor or ceiling cavity.
•  Enclosed space such as an attic or garage.
•  Close proximity to exhaust vents or chimneys.
Fumes or odor may result.
•  Remove and discard cover plate or knockout from side 
of appliance.
•  Open air kit damper slightly.
•  Locate door hinge toward back of appliance (see Figure 
7.1).
•  Attach damper assembly to appliance using screws 
provided (see Figure 7.2).
•  Insert narrow end of handle through tab and into upper 
slot of door.
•  Check handle operation. Pull handle out to open, and in 
to close.
Figure 7.2  Outside Air Kit Installation
Figure 7.1  Damper Assembly and Handle
HANDLE
HINGE
DOOR
B.  Gas and Electrical Connections
If applicable, ensure that gas and electrical connections are 
installed at this time. Refer to Sections 9 (Gas Information) 
and 10 (Electrical Information).  
WARNING