Hearth & Home Technologies Bravo 사용자 설명서

Hearth & Home Technologies, Inc.  •  Bravo, Aztec  •  InD  •  703-900  Rev. N  •  8/06

35

Remove shipping materials from inside or underneath the 
fi rebox.

Clean/vacuum any sawdust that may have accumulated 
inside the fi rebox or underneath in the control cavity.

Install approved accessories per instructions included with 
accessories. See Service Parts List for appropriate acces-
sories. Refer to Section 16.

Shock or fi re risk.
Use ONLY optional accessories approved for 
this appliance.

•  Using non-listed accessories voids 

warranty.

•  Using non-listed accessories may result in 

a safety hazard.

•  Only Hearth & Home Technologies 

approved accessories may be used safely.

•  Follow ember placement instructions in 

manual.

•  Do NOT place embers directly over 

burner ports.

•  Replace ember material annually.

Explosion  Risk.

Improperly placed embers interferes with proper burner 
operation.

Ember material is shipped with this gas appliance. To place 
the ember material:

•  Embers CANNOT be placed directly over ports. 

•  When placing Glowing Embers

®

 

onto the burner care 

should be taken so that the ports are not covered. Place 
the dime-size ember pieces near the ports, but not on the 
ports (see Figure 12.1). Failure to follow this procedure 
will likely cause lighting and sooting problems.

•  Save the remaining ember materials for use during appli-

ance servicing. The embers provided should be enough 
for 3 to 5 applications.

Place the lava rock on the bottom of the fi rebox. Evenly 
spread the lava rocks with your hand.

Place material near ports but do NOT cover 
port openings.