Freecom Technologies RCS-M1000U 사용자 설명서
BEFORE USING
IMPORTANT: Remove unit from packaging and discard clear, plastic wrapping. Place unit
in its upright position for a minimum of two hours before operating for the first time.
in its upright position for a minimum of two hours before operating for the first time.
1.
Place unit on a solid, level surface.
Operating this unit on uneven or soft
surfaces may cause vibration, noise, and
possible water leakage from the condensate
tank.
Operating this unit on uneven or soft
surfaces may cause vibration, noise, and
possible water leakage from the condensate
tank.
2.
Place unit at least 20" from any walls,
draperies, or other obstructions. Carefully
push the unit on its caster wheels to
desired location.
draperies, or other obstructions. Carefully
push the unit on its caster wheels to
desired location.
CAUTION: Do not operate unit without
condensate water tank and air filters
properly in place.
condensate water tank and air filters
properly in place.
3.
Check that condensate water tank is
properly installed. When properly installed,
the door of the condensate water tank will
be flush with the exterior of the unit.
properly installed. When properly installed,
the door of the condensate water tank will
be flush with the exterior of the unit.
4.
Check that both air filters are clean and
properly installed.
properly installed.
SPECIFICATIONS
Model
Power/Electrical
Cooling Capacity
Input
EER
Requirements
RCS-M1000T
110/115 volt, 60Hz
4000 BTU/h (1170W)
410W
9.76
RCS-M1000U
220/240 volt, 50Hz
3500 BTU/h (1030W)
310W
N/A
8