Sony HT-FS3 사용자 설명서
61
GB
Ad
dition
dition
al I
n
n
fo
rm
atio
n
The S-AIR function
S-AIR connection is not established (sound
transmission is not established), e.g., the
indicator of the S-AIR sub unit turns off,
flashes, or turns red.
transmission is not established), e.g., the
indicator of the S-AIR sub unit turns off,
flashes, or turns red.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
S-AIR main unit you are using.
• Confirm that the S-AIR IDs of the
subwoofer and the S-AIR sub unit are the
same (page 51).
same (page 51).
• Another S-AIR sub unit is paired to the
S-AIR main unit. Pair the desired S-AIR sub
unit with the S-AIR main unit (page 54).
unit with the S-AIR main unit (page 54).
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
devices.
• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make sure
• The S-AIR sub unit is turned off. Make sure
the AC power cord (mains lead) is connected
and turn on the S-AIR sub unit.
and turn on the S-AIR sub unit.
No sound is heard from the S-AIR sub unit.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
S-AIR main unit you are using.
• Confirm that the S-AIR IDs of the
subwoofer and the S-AIR sub unit are the
same (page 51).
same (page 51).
• Check the pairing setting (page 54).
• Place the S-AIR main unit and S-AIR sub
• Place the S-AIR main unit and S-AIR sub
unit closer together.
• If you are using any equipment that
generates electromagnetic energy such as a
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting
• Change the “RF CHANGE” setting
• Change the S-AIR ID settings of the S-AIR
main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then
turn on them.
• Sources with copyright protection may not
be playable on S-AIR receivers.
• Wireless surround amplifiers cannot be used
with this system. The system does not
support S-AIR devices other than S-AIR
receivers.
support S-AIR devices other than S-AIR
receivers.
There is noise or the sound skips.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
S-AIR main unit you are using.
• Place the S-AIR main unit and S-AIR sub
unit closer together.
• If you are using any equipment that
generates electromagnetic energy such as a
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting
• Change the “RF CHANGE” setting
• Change the S-AIR ID settings of the S-AIR
main unit and S-AIR sub unit.
Other
The remote does not function.
• Point the remote at the remote sensor
in
the front panel display.
• Remove any obstacles in the path between
the remote and the front panel display.
• Replace both batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on the
remote.
The volume turns down when the output
method changes from the TV speaker to the
system speaker.
method changes from the TV speaker to the
system speaker.
• The Volume Limit function is working. For
details, refer to “Using the Volume Limit
function” (page 32).
function” (page 32).
continued