Axor 34134XX1 사용자 설명서

3

Install the friction washer and fiber washer on the valve.
Push the valve up through the hole in the mounting surface.
Install the sealing rings, escutcheon, and nuts.

Rest the valve / escutcheon assembly on the mounting 

surface (1).
Tighten the screws ().
Push the handles into place (3).  

Push the spout shank up through the mounting surface 

(1).  
Install the shaft fastening ring ().  

The notch on the shaft fastening ring and the notch 

on the shank must face away from the basin.

Install the fiber washer, friction washer, and mounting 

nut (3).  

The hot valve is marked with red.

1

3

1

3