Panasonic MC-UG787 사용자 설명서
OVERLOAD
PROTECTION
RESET button
Protector contra
sobrecargas
(Botón de
restauración)
Bouton de remise
en circuit de
la protection
de surcharge
Overload Protection
➢
➢
The OVERLOAD PROTECTION
RESET button stops the nozzle
motor when the brush jams to
prevent belt breakage.
RESET button stops the nozzle
motor when the brush jams to
prevent belt breakage.
NOTE: The vacuum cleaner motor will
continue to run.
continue to run.
TO CORRECT PROBLEM:
➢
➢
Unplug electrical cord.
➢
➢
Check nozzle areas for excessive
lint buildup or jamming.
lint buildup or jamming.
➢
➢
Clean jammed area.
TO RESET:
➢
➢
Press reset button on top of the
nozzle. Plug in and turn on vacuum
cleaner.
nozzle. Plug in and turn on vacuum
cleaner.
Thermal Protector
➢
➢
If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢
➢
To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
clean/replace filters.
➢
➢
Replace full bag if necessary.
➢
➢
Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
- 20 -