Emerson Rosemount 2230 사용자 설명서

300560EN, Rev AA

May 2011

Rosemount 2230

4-2

Section 4. Configuration and Operation

This chapter provides information about configuration and operation of the 
Rosemount 2230 Graphical Field Display. 

For information on how to use TankMaster WinSetup to configure the 2230, 
see the Raptor System Configuration Manual (Document no.300510EN).

The Rosemount 2230 is a graphical display designed for viewing tank data in 
tough environments. It features adjustable LCD contrast, backlight, 
multi-language support, and communication failure indication. 

The four softkeys allow you to navigate through the different menus and to 
select various functions for tank data viewing and service.

Menu: opens the Main Menu with various options for configuration of the 
2230 display.

Pause: stops toggling the measurement variables until the Resume button is 
pressed.

Down arrow: lets you scroll through the list of measurement variables and 
tanks.

Status: lets you view the current status of the presented measurement 
variable. See also “Status Information” on page 5-11.

A symbol in the upper right-hand corner of the display indicates that the 2230 
is operating and communicates on the Tankbus.

Figure 4-1. The 

Rosemount 2230 display

The Rosemount 2230 is powered by the Tankbus (see “Power Requirements” 
on page 3-7).

The 2230 automatically adjusts display contrast to optimize for changes of 
ambient temperature. The contrast can be manually adjusted when further 
fine-tuning is desired. To increase the display contrast, press the two buttons 
on the right-hand side simultaneously. To decrease the contrast, press the two 
buttons on the left-hand side. It takes approximately 10 seconds to adjust 
from minimum to maximum contrast.

The contrast can also be adjusted by using the Contrast service command: 
<Menu><Service><LCD Contrast>.