Hearth & Home Technologies 31ST-ACC 사용자 설명서

September 1, 2008

7033-277F

Page  19

R

Follow manufacturers instructions for clearance, securing, 
flashing and terminating the chimney.

  • 

Must have an approved and listed cap

•

Must not be located where it will become plugged by 

snow or other material

 

•  Must terminate at least  feet (91cm) above the roof 

and at least 2 feet (61cm) above any portion of the 

roof within 10 feet (05cm).

 

•  Must  be  located  away  from  trees  or  other  struc-

tures

NOTE:
•  Chimney performance may vary.
•  Trees, buildings, roof lines and wind conditions affect 

performance.

•  Chimney height may need adjustment if smoking or 

overdraft occurs.

 ft.  (91cm)

Minimum

Less than 10 ft. (05cm)

2 ft. (61cm)

 ft. (91cm)

Minimum

10 ft. (05cm) To Nearest Roofline

2 ft. (61cm)

Pitched Roof

10 ft. (05cm) or more

 ft.  (91cm) Minimum

Less than 10 ft. (05cm)

2 ft. (61cm)Minimum

 ft. (91cm) Minimum

Wall or Parapet

Flat Roof