Adcom GFA-7700 사용자 설명서

The audio inputs for the GFA-7700 are through high-quality, gold-plated RCA jacks to minimize high-

frequency losses, noise, etc. They will accept standard RCA-type plugs, one for each of the five 

channels; Front L (Left), Center, Front R (Right), Surround L (Left), and Surround R (Right). To insure 

that the performance designed into the GFA-7700 is preserved, you should use the highest quality 

audio cables possible. There are many cables which are color-coded and specifically designed for this 

application. Your Adcom dealer can help select the best cable for your needs. (See 

GFA-7700 for more information.)

The GFA-7700’s connections to the loudspeakers are made through high-grade, 5-way, gold-plated 

binding post terminals. There are two terminals for each speaker, which are colored RED for the 

positive (+) output and BLACK for the negative (-) output.

The binding posts will accept a variety of connector types; the most secure and prevalent of these is 

the “U”-type spade connectors (at least 0.25” wide and maximum width of 0.57”). The terminal will 

also accept bare wire (up to AWG10) and “banana” type plugs (single or dual.) (See CONNECTING THE 

GFA-7700 for more information)

Input connections may be made with the optional DB-25 computer-type connector. Using this type of 

connecting cable would override the need to use the RCA-type inputs (1). This mode of connection 

retains the same high level of signal transfer, simplifies the job significantly and insures automatic, 

correct connections to all channels.

5