Parasound AVC-2500 사용자 설명서

52

1. Activate the tuner in the manual tuning mode by pressing the Tuning button on the front

panel twice. The Rotary Knob then becomes the tuning knob. 

OR

, and 

or 

 appear in the displays.

2. Select the FM or AM band.
3. Tune up or down incrementally by turning the Rotary Knob. Manual tuning may be

actually improve reception by letting you deliberately “de-tune” a weak station that is
subject to interference from stronger adjacent stations.

 You can press the Source button to cancel the tuner and return to the last selected

input source.

1. Press the Tuning button on the remote control to activate the tuner in the preset select

mode. 

OR

 

and 

appears in the displays.

2. Press the Tune 

f

f

f

f

f or e 

e 

e 

e 

e buttons to select the desired preset number.

1. Press any of the 10 numerical preset numbers to activate the tuner and select the radio

station preset to that number. 

and 

appears in the

displays.

2. To access preset numbers above 

 press and hold the numerical button down for two

seconds to add 10 to the number. For example, to access preset 

, press and hold down

numerical button number 5 for two seconds and 

 will be selected.

1. Press and hold the Tuning button on the remote control to activate the tuner in the

automatic tuning mode. 

and 

 appear in

the displays.

2. Press the FM/AM button to tune to the desired broadcast frequency.
2. Press the Tune 

f

f

f

f

f or e 

e 

e 

e 

e buttons to tune to the desired broadcast frequency.

1. Press and hold the Tuning button on the remote control to activate the tuner in the

automatic tuning mode. 

and 

 appears in

the displays.

2. Press the Tuning buttons again to switch from automatic to manual tuning.
3. Press the Tune 

f

f

f

f

f or e 

e 

e 

e 

e buttons to tune in 50 kHz increments.

 You can press the tuning button to scroll through the tuner modes and to return to the

last selected input source.

1. Tune into the FM or AM radio frequency the source you want to store into preset memory.

and 

 appear in the displays. If the preset station already has

a station stored into it, the displays will indicate 

.

2. Press and hold the Memory button on the front panel or the Mem/Enter button on the

remote to store the preset station. 

 

appears in the

displays for two seconds to indicate that the station has been stored into preset memory.

3. Repeat the process for all twenty presets.