Denon AVP-A1HDCI 사용자 설명서

0

Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.

 :  Display when “Feet” is set.

 :  Display when “Meters” is set.

Select test tone playback method.

 

f

Adjust channel levels to obtain equal volume from all speakers.

Select surround speaker from which test tone is output.

 

 

Output test tone.

z

 

 

 

 

 

z

: “OFF” can be set by pressing o when the subwoofer’s volume is 

set to –12 dB.

Adjusting  with  the  main  remote  control  unit  using  the  test  tones 
is  only  possible  in  the  “Auto”  mode  and  only  effective  in  the 
STANDARD (Dolby/DTS Surround) and HOME THX CINEMA modes. 
The adjusted levels for the different modes are automatically stored 
in the memory.
G

Adjusting using test tonesH

q

  Press the 

 button.

    Test tones are output from the various speakers.
w

  Use the 

o

 

p

 button to adjust so that the volume is equal for all 

speakers.

e

  When  the  adjustments  are  completed,  press  the 

  button 

again.

• The level of each channel should be adjusted to 75 dB (Cweighted, 

slow meter mode) on a sound level meter at the listening position. If 
a sound level meter is not available adjust the channels by ear so the 
sound levels are the same. Because adjusting the subwoofer level 
test tone by ear is difficult, use a well known music selection and 
adjust for natural balance.

• When  the  GUI  menu  “Speaker  Configuration”  –  “Surround  Back” 

setting (vpage 29) is set to “1spkr”, the surround back speaker 
display is set to “Surround Back”.

• Speakers set to “None” in the “Speaker Configuration” settings are 

not displayed.

• “Surround”  can  be  set  when  GUI  menu  “Speaker  Configuration” 

–“Surround B” is set to “Large” or “Small” (vpage 29).

• When using surround speakers, be sure to adjust the volume of the 

different speakers.

• When “Channel Level” is adjusted, the adjusted values are set for all 

the surround modes. To adjust the channel level separately for the 
different surround modes, use the operation see page 75.

Resets the settings to the default values.

Set  the  distance  between  the  listening  position  and  the  various 
speakers to no more than 20 ft (6.00 meters).

Two  surround  back  speakers  are  required  to  use  the  THX  Ultra2 
Cinema, THX Music mode and THX Games mode.
Set the surround back speakers so that the distance to the listening 
position is the same for both the left and right speakers.
It is also recommended that the deviations of the distance from the 
listening position to L and R channel speakers (front left (FL) and front 
right (FR), surround left (SL) and surround right (SR), surround back left 
(SBL) and surround back right (SBR) is less than 2 ft (60 cm).

d

Set distance from listening position to speakers.
Before  making  the  settings,  measure  the  distance  from  the 
listening position to the different speakers.

Select unit for distance.

Select step. (smallest distance)

1ft   0.1ft

 :  Can be selected when “Feet” is set.

0.1m   0.01m

 :  Can be selected when “Meters” is set.

Resets the settings to the default values.

g

Select crossover frequency from which subwoofer handles low 
range signal.

 :

Setup when using a THX-certified speaker.

 

 

 

 

 

 

 

  

 

 :

Only  the  portion  of  the  bass  sound  of  the  various  speakers  output 
from  the  subwoofer  that  has  a  frequency  below  the  frequency  set 
here is output.
Set  this  according  to  the  low  frequency  reproduction  capabilities  of 
the speakers you are using.

 :

Specify crossover frequency for each speaker.