KVH Industries L2 사용자 설명서

3.2

Tracking the Correct Satellite

If your system is connected to an IRD’s low-speed data port,
follow the steps in

Section 3.2.1, “Using the IRD for Satellite

Selection.”

If your system is not connected to an IRD’s low-speed

data port, follow the steps in

Section 3.2.2, “Using the Switchplate

for Satellite Selection.”

3.2.1 Using the IRD for Satellite Selection

If your TracVision L2 is connected to an IRD’s low-speed data
port, the antenna will automatically find and track the correct
satellite based on the information it receives from the IRD. No
user interaction is required.

3.2.2 Using the Switchplate for Satellite

Selection

If your system is not connected to an IRD’s low-speed data port,
you will need to use the switchplate to manually find your
satellite.

1. Press the switchplate’s SAT SELECT button.

2. The Status indicator flashes while the antenna

searches for a satellite signal. Once the antenna
finds and starts tracking a satellite, the Status
indicator stops flashing.

3. If your TV shows a clear picture, you are tracking

the correct satellite. If no picture appears, repeat
this procedure starting with Step 1.

3.2.2.1

The Status Indicator

If your system is not connected to an IRD’s low-speed data port,
the switchplate’s Status LED indicates the antenna’s current
condition. Table 3-1 describes this LED’s four conditions.

LED Condition

Meaning

OFF

Initializing, please wait

Tracking a satellite

Slow Flashing

Searching for a satellite, please wait

Fast Flashing

System error, see

Section 4, “Troubleshooting”

3-3

Using Your TracVision L2