HTC LZC6130 / 965879801 사용자 설명서

다운로드
페이지 76
MAINTENANCE
40
 - Husqvarna
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from 
leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling 
deteriorates, which can lead to engine damage.
Throttle Cable
Check that the engine responds to throttle increases 
and that a good engine speed is attained at full 
throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, locate the engine cables 
mounted under the air filter housing. The throttle cable 
sits on the right side of the engine.
Loosen the clamping screw for the cable’s outer 
1. 
casing and move the throttle to the full throttle 
position.
Check that the throttle cable is mounted in the 
2. 
middle hole in the throttle lever.
Push the throttle cable’s outer casing as far to the 
3. 
left as possible and tighten the clamping screw.
8011-780
Check and clean the cooling air intake
Choke Cable
If the engine produces black smoke or is difficult 
to start, this can be because the choke cable is 
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made
as follows:
Loosen the clamping screw for the cable’s 
1. 
outer casing and move the choke lever to the 
full choke position.
Check that the choke cable is mounted in the 
2. 
upper lever, see illustration. Push the choke 
cable’s outer casing as far to the right as 
possible and tighten the clamping screw.
8011-605
Adjusting the throttle cable
8011-605
Adjusting the choke cable