PYLE Audio PPDLD3 전단

DELAY EFFECT PEDAL

PPDLD3

INSTRUCTIONS

PPDLD3 : Delay

Input Impedance: 1M Q

Output Impedance: Over 10k Q

Power Supply:

9 V

DC :

Dry Battery

9 V

type

( 6F22/9V)

AC Adaptor.

Current Draw: 12mA

(9V

DC )

I. D.TIME Knob

This is the delay times control . times is increased when control

is turned clockwise and decreased when turned counterclockwise.

2. FEEDBACK knob

This controls the amount of feedback. delay effect will

increase by turning it clockwise and decrease by turning it

counterclockwise.

3. D.LEVEL knob

Controls the level of delay. Effect is increased by turning

clockwise and decreased by turning it counterclockwise.

4. Output Jack

The output jacks are used to connect the unit to amplifiers

or other devices.

5. AC Adaptor Jack

Accepts connection of an AC Adaptor. By using an AC
Adaptor, you can play without being concerned about how
much battery power you have left .

Input Jack

This jack accepts input signals (coming from a guitar ,

some other electric or electronic musical instrument, or
another effects unit)

7. Check Indicator

This indicator shows whether

effect is ON/OFF, and

also doubles as the Battery Check  indicator .The indicator
lights  when an effect is ON.  If this indicator goes  dim or
no longer lights while an effect  is ON,  the battery is near

exhaustion and should be replaced immediately.

8. Pedal Switch

This Switch turns the effects ON/OFF.

Battery Housing

9 V

Battery is be placing inside it .