Roland VS-700 사용자 설명서

 

Creating a Patch

 

For each tone, specify how pan messages will be received.

 

Whenever Pan messages are received, the stereo 

position of the tone will be changed.

 

The pan of the tone will be changed only when 

the next note is played. If a pan message is 

received while a note is sounding, the panning 

will not change until the next key is pressed.

 

The channels cannot be set so as not to receive Pan 

messages.

 

You can specify, on an individual tone basis, whether or not 

the sound will be held when a Hold 1 message is received 

after a key is released, but before the sound has decayed to 

silence. If you want to sustain the sound, set this “ON.” When 

using this function, also set the Rx Hold-1 parameter “ON.” 

This function is effective for piano sounds.

 

 OFF, 

ON

 

Matrix Control Settings (Matrix Ctrl1–4)

Ordinarily, if you wanted to change tone parameters 

using an external MIDI device, you would need to send 

System Exclusive messages—MIDI messages designed 

exclusively for the Fantom VS. However, System 

Exclusive messages tend to be complicated, and the 

amount of data that needs to be transmitted can get 

quite large.

For that reason, a number of the more typical of the 

Fantom VS’s tone parameters have been designed so 

they accept the use of Control Change (or other) MIDI 

messages for the purpose of making changes in their 

values. This provides you with a variety of means of 

changing the way patches are played. For example, you 

can use the Pitch Bend lever to change the LFO cycle 

rate, or use the keyboard’s touch to open and close a 

filter.

The function which allows you use MIDI messages to 

make these changes in realtime to the tone parameters 

is called the Matrix Control. Up to four Matrix Controls 

can be used in a single patch.

To use the Matrix Control, specify which MIDI message 

(Source parameter) will be used to control which 

parameter (Destination parameter), and how greatly 

(Sns parameter), and the tone to which the effect is 

applied (Tone parameter).

VS-700_r_e.book 121 ページ ２００８年１１月２０日　木曜日　午後２時２８分