Roland VS-700 사용자 설명서

 

CHANNEL STRIP Section

 

Use the touch sensitive motorized faders to control levels of audio tracks, MIDI tracks and buses.

When tracks/buses are armed for automation recording, the faders allow you to record automation data by 

touching/releasing the faders. 

 

 

During playback, the motorized faders move in response to existing automation data.

 

The motorized faders are very quiet, but there may be situations when you want total silence when mixing 

a soft piece of music or recording with a microphone near the VS-700C Console. To disable the fader 

motors, press [COMMAND]+[I/O] buttons to open the 

 

 property page, then click 

 

.

 

Hold the [COMMAND] modifier button and touch/move a fader.

The top row on the LCD display shows “Revert”. After 1/2 second, the parameter reverts to its previous value and the 

LCD display reverts to its previous display mode.

When FLIP mode is enabled, the functions of the rotary encoders and faders are swapped, allowing you to use the 

faders for more detailed control of the currently assigned encoder function (refer to 

 

By default, the fader value is only displayed on the LCD display when you move the fader. To toggle between always 

showing rotary encoder values or fader values on the LCD display, press [SHIFT]+[FLIP] buttons.

 

fig.2-2.eps

 

The master fader controls the first available bus in your project, however it can be assigned to control the level of any 

stereo or surround bus in SONAR.

 

Drag the WAI strip in SONAR to assign a bus to the master fader. For more information about the WAI strip, see the 

SONAR online Help.

 

Channel Fader

FLIP Mode

Master Fader

VS-700_r_e.book 32 ページ ２００８年１１月２０日　木曜日　午後２時２８分