Denon DN-X1600 사용자 설명서

8

Output from this RCA terminal is the digital output 
data.
These signals are not affected by the master level 
adjustments.
We recommend using an RCA cable designed for 
digital signals (75 ohms). (This can be purchased 
from an audio/video store.)

MIDI output terminal
This is a 5 Pin DIN connector output terminal.
This is connected to a MIDI-compatible device.

REC OUT terminals
These are the recording output terminals.

MASTER OUT (UNBALANCED) terminals
This stereo pair of RCA terminals provides a 
unbalanced line level output.
Connect these terminals to the unbalanced analog 
input terminals on an amplifi er or console.

MASTER OUT (BALANCED) terminals
These XLR type connectors provide a balanced line 
level output.
Connect these connectors to the balanced analog 
input connectors on an amplifi er or console.

• Pin layout: 
 1. GND
 2. Hot
 3. Cold

• Applicable connector:
  Cannon XLR-3-32 or equivalent.

BOOTH OUT (BALANCED) terminals
These TRS terminals are balanced line output 
terminals whose signal levels are adjusted using 
the BOOTH LEVEL control provided on the top 
panel.

• Pin layout (TRS): 
 Tip: Hot
 Ring: Cold
 Sleeve: GND

SEND/RETURN terminals
These 1/4” TS mono terminals allow external 
processing of the program signal.
When connect monaural type effect processor, use 
Lch input and output.

• SEND (output):
  Connect this to the input terminal on the external 

effector.

• RETURN (input):
  Connect this to the output terminal on the external 

effector.

HEADPHONE output jack
Accepts 1/4” stereo headphone plugs.

To prevent hearing loss, do not raise the volume 
level excessively when using headphones.

CD recorder 
or PC

Effects processor

Tape deck

Main unbalanced 

power amplifi er

Main balanced 

power amplifi er

Booth balanced 
power amplifi er

Sequencer

Video 
mixer