Denon DN-X1600 사용자 설명서
15
Get
ting Star
te
d
Connections
Basic Oper
ations
Specifi
cations
Tr
oubleshooting
Ef
fect
or F
or F
unction
Fader Start
Utility
USB
F
ader Star
t
ENGLISH
Crossfader Start
1
Using the
SOURCE SEL
controls, select the source
from LINE1 CD, LINE2 CD, LINE3 CD and
LINE4 CD.
LINE4 CD.
2
Set the
CROSSFADER ASSIGN
switches (A/
THRU/B) to A or B.
3
Turn on the
CROSSFADER START
switches.
4
Slide the
Crossfader
all the way in direction
opposite the source you want to start.
(In the following example, startup is done with the
CD player connected set to Assign A.)
(In the following example, startup is done with the
CD player connected set to Assign A.)
5
Set the standby mode on CD player.
6
Use the
CROSSFADER CONTOUR
control to control
the cross fader startup curve.
7
When the
Crossfader
is slide in the opposite
direction, CD player play will begin.
FADER (setting the fader curve)
This adjusts the rise response of the channel fader/cross
fader.
fader.
1
Setting the channel fader curve
•
When the
channel fader CONTOUR
control is turned to the
left, the curve will have characteristics that rise gradually.
•
When turned to the right, it will have characteristics that
rise sharply.
•
At the center position, curve characteristics between the
two will be produced.
•
The same curve characteristics apply to channels 1 to 4.
2
Setting the crossfader curve
•
When the
crossfader CONTOUR
control is turned to the
left, the curve will have characteristics that rise gradually.
•
When turned to the right, it will have characteristics that
rise sharply, and cut-in and cut-out operations will be
performed.
performed.
•
At the center position, curve characteristics between the
two will be produced.
How to adjust the Crossfader torque
1
Remove the rubber cap of the front panel.
2
Move the
Crossfader
to the far right until the screw
head becomes visible.
3
Insert a screwdriver, and adjust the sliding torque.
•
When the screw is turned clockwise:
The sliding torque is increased so that the Crossfader
moves more stiffl y.
•
When the screw is turned counterclockwise:
The sliding torque is decreased so that the Crossfader
moves more easily.
4
After completing the adjustments, replace the
rubber cap onto the front panel.
rubber cap onto the front panel.
NOTE
•
The Crossfader has a high-precision construction: As such, tightening
the screw with too much force or loosening it excessively may result
in damage or adversely affect performance.
in damage or adversely affect performance.
Rubber cap
Screwdriver