Radio Shack 12-251 사용자 설명서

16

Your Weatheradio is preprogrammed to receive
broadcasts for all FIPS codes, and is prepro-
grammed with the seven national NOAA broadcast
frequencies (Channels 1–7).

The first time you use your Weatheradio, it is auto-
matically set to use the NOAA weather broadcast
frequency 162.400 MHz (Channel 1) and receive all
SAME alert signals broadcast within a 50-mile radi-
us of where you installed it.

Depending on your location, you might need to se-
lect a different channel and enter one or two FIPS
codes into the Weatheradio.

• To stop programming the Weatheradio at any

time during the steps described in this section,
set 

 to 

. The

Weatheradio saves any valid entries you made.

• The Weatheradio will not receive a weather

alert while you program it.

12-251.fm  Page 16  Tuesday, March 14, 2000  12:40 PM