Datalogic Scanning PD7100 사용자 설명서

Data Editing

This feature allows conversion of the case of all alphabetic characters to upper or lower 
case.

Character conversion is an eight byte configuration item. The eight bytes are 4 character 
pairs represented in hexadecimal ASCII values. The first character in the pair is the char-
acter that will be converted. The second character in the pair is the character to convert 
to. If the character to convert in a pair is FF, then no conversion is done.

For example, if you have the character conversion configuration item set to the following: 
41423132FFFFFFFF

The first pair is 4142 or AB (41 hex is an ASCII capital A, 42 hex is an ASCII capital B) 
and the second pair is 3132 or 12 (31 hex is an ASCII 1, 32 is an ASCII 2). The other 
two pairs are FFFF and FFFF.

With the label, AB12BA21, it would look as follows after the character

ENTER/EXIT PROGRAMMING MODE

Case Conversion = Disable (no case conversion)

Case Conversion = Convert to upper case

Case Conversion = Convert to lower case

DEFAULT