Datalogic Scanning PD7100 사용자 설명서

Symbologies

254

PowerScan

PD7100 Corded

Standard 2 of 5 — cont.

Standard 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for

Standard 2 of 5 Length Control

Length 1 is the minimum label length if in

Variable Length

Mode, or the first fixed

length if in

Fixed Length

Mode. Length includes the barcode’s check and data charac-

ters.
The length can be set from 1 to 50 characters.

Follow these instructions to set this feature:

1. Determine the desired character length (from 1 to 50). Pad the number with lead-

ing zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

2. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Program-

ming Mode.

3. Scan the barcode: SELECT STANDARD 2 OF 5 LENGTH 1 SETTING.

4. Scan the appropriate two digits from the keypad in

Appendix E, Keypad

, that rep-

resent the length setting which was determined in the steps above. You will hear a
two-beep indication after the last character.

5. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Program-

ming Mode.

This completes the procedure. See

Table 33

for some examples of how to set this feature.

Table 33. Standard 2 of 5 Length 1 Setting Examples

NOTE

If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.

STEP

ACTION

EXAMPLES

Desired Setting

01 Character

07 Characters

15 Characters

50 Characters

Scan ENTER/EXIT PROGRAMMING MODE

Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix E, Keypad

‘0’ and ‘1’

‘0’ and ‘7’

‘1’ and ‘5’

‘5’ AND ‘0’

Scan ENTER/EXIT PROGRAMMING MODE