Datalogic Scanning QD2100 사용자 설명서

Getting Started

This manual contains feature descriptions and barcodes which allow you to reconfigure 
your imager. Some programming barcode labels, like the 

Standard Product Default Set-

tings on page 9

, require only the scan of that single label to enact the change. Most of 

the programming labels in this manual, however, require the imager to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/EXIT barcode once to enter-
Programming Mode. Once the imager is in Programming Mode, you can scan a number 
of parameter settings before scanning the ENTER/EXIT barcode a second time, which 
will then accept your changes, exit Programming Mode and return the imager to normal 
operation.

Upon completing the physical connection between the imager and its host, proceed di-
rectly to 

Interfaces on page 11

 for information and programming for the interface type 

the imager is connected to (for example: RS-232, Keyboard Wedge, USB, etc.) and scan 
the appropriate barcode in that section to select your system’s correct interface type.

The imager is typically factory-configured with a set of default features standard to the 
interface type you ordered. If after scanning the interface barcode from the 

Interfaces

section, your installation requires you to select  options to further customize your imager, 
turn to the appropriate section for your interface type as listed below:

•

RS-232 ONLY Interface, starting on page 41

•

Keyboard Interface, starting on page 67

•

USB-OEM Interface, starting on page 81

•

IBM 46XX Interface, starting on page 83

If your installation requires different programming than the standard factory default set-
tings, the following sections of this manual allow configuration of non-interface-specific 
settings you might require:

General Features

General Features includes programming for scanning, beeper and 

LED indicators and other such universal settings.

Symbologies

Includes options concerning the barcode label types (symbologies). 

These settings allow you to enable/disable symbologies, set label lengths, require check 
digit, etc.