Datalogic Scanning QD2100 사용자 설명서

Symbologies

This feature specifies one of the barcode lengths for 

Standard 2 of 5 Length Control

.

Length 2 is the maximum label length if in 

Variable Length

 Mode, or the second fixed 

length if in 

Fixed Length

 Mode. Length includes the barcode’s check and data charac-

ters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length 
(only one fixed length).

Follow these instructions to set this feature:

1. Determine the desired character length (from 1 to 50 — or 0 to ignore this length). Pad 

the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, 
etc.

2. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Programming 

Mode.

3. Scan the barcode: SELECT STANDARD 2 OF 5 LENGTH 2 SETTING.

4. Scan the appropriate two digits from the keypad in 

Appendix E, Keypad

, that represent 

the length setting which was determined in the steps above. You will hear a two-beep indi-
cation after the last character.

5. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming 

Mode.

This completes the procedure. See 

Table 34

 for some examples of how to set this feature.

00 (Ignore This 

Length)

07 Characters

15 Characters

50 Characters

Appendix E, Keypad

 ‘0’ and ‘0’

‘0’ and ‘7’

‘1’ and ‘5’

 ‘5’ AND ‘0’