Panasonic KX-FLB851 사용자 설명서
8. Programmable Features
63
To set the timer before returning to the default
operation mode (feature #463).
{
operation mode (feature #463).
{
0} “
OFF”: Deactivates this feature.
{
1} “
30s”: 30 seconds
{
2} “
1min” (default): 1 minute
{
3} “
2min”: 2 minutes
{
4} “
5min”: 5 minutes
{#}{
4}{8}{2} Setting toner save feature
TONER SAVE
MODE=OFF
[V^]
{
0} “
OFF” (default): Deactivates this feature.
{
1} “
ON”: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by
reducing toner consumption.
reducing toner consumption.
8.4 Fax features
{#}{
4}{0}{1} Printing a confirmation report
CONFIRM REPORT
=ERROR
[V^]
To print a confirmation report for fax transmission
results (page 27).
{
results (page 27).
{
0} “
OFF”: Confirmation reports will not be
printed.
{
{
1} “
ON”: A confirmation report will be printed
after every transmission.
{
{
2} “
ERROR” (default): A confirmation report will
be printed only when fax transmission fails.
{#}{
4}{0}{2} Setting the journal report to
print automatically
AUTO JOURNAL
MODE=ON
[V^]
{
0} “
OFF”: The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{
transmissions and receptions.
{
1} “
ON” (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 27).
transmissions and receptions (page 27).
{#}{
4}{1}{1} Sending documents overseas
OVERSEAS MODE
=ERROR
[V^]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
{
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
{
0} “
OFF”: Deactivates this feature.
{
1} “
NEXT FAX”: This setting is effective only for
the next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
{
transmission, the unit will return to the previous
setting.
{
2} “
ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
document.
Note:
L
This feature is not available for broadcast
transmission.
transmission.
L
Calling charges may be higher than usual.
{#}{
4}{1}{2} Sending a fax at a specific time
DELAYED SEND
MODE=OFF
[V^]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
cost calling hours offered by your telephone
FLB851-PFQX2175YA-en.book Page 63 Thursday, September 8, 2005 2:24 PM