Samsung UD55A 사용자 설명서

•

The function knob can be attached to any screw hole on the display.

•

Align the screw holes of the display and function knob. Next, fasten using the screw.

Using a screw other than the one supplied can damage the display.

Hold the area marked in the

picture.

Push the areas marked.

Hold the areas marked, and

lift the function knob.

See the "Connections" section for details about cable connections. The LCD Display's configuration
at the back may vary slightly depending on the model.

 

 IR OUT

Receives  a  signal  from  the  remote  control  and
outputs  the  signal  through  Loopout  when  a  re-
movable sensor board is connected.

 CONTROL IN

Connects to the function (Power/Source) control
buttons and receives the light sensor signal and
remote control's IR signal.

Introduction