Nortel Networks 311 사용자 설명서
876
NTAK09 1.5 Mb DTI/PRI card
extend from the card to the DSX-1 or LD-1. Equalizers are switch selectable
through dip-switches. The settings are shown in
through dip-switches. The settings are shown in
.
Table 360
NTAK09 switch settings
NTAK09 switch settings
Switch Setting
Distance to Digital Cross-Connect
1
DCH F/W
2
(LEN 0)
3
(LEN 1)
4
(LEN 2)
0 - 133 feet
Off
Off
Off
On
133 - 266 feet
Off
On
On
Off
266 - 399 feet
Off
Off
On
Off
399 - 533 feet
Off
On
Off
Off
533 - 655 feet
Off
Off
Off
Off
Receiver
The receiver extracts data and clock from an incoming data stream and
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
The receiver extracts data and clock from an incoming data stream and
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
The receiver extracts data and clock from an incoming data stream and
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver operates correctly with up to 655 feet of ABAM cable between
the card and the external DS1 signal source.
Connector pinout
The connection to the external digital carrier is through a 15-position male
D-type connector. See
D-type connector. See
Table 361
DS-1 line interface pinout for NTBK04 cable
DS-1 line interface pinout for NTBK04 cable
From 50-pin MDF
connector
To DB-15
Signal name
Description
pin 48
pin 1
T
transmit tip to network
pin 23
pin 9
R
transmit ring to network
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.