DFI 40800950 사용자 설명서

Hardware Installation

2.5 Jumper Settings for Wake-On-Keyboard/

Wake-On-Mouse

Wake-On-Keyboard/Wake-On-Mouse - Jumper JP1

The system board supports the

Wake-On-Keyboard/Wake-On-

Mouse function. This function allows

you to use the keyboard or PS/2

mouse to power-on the system. By

default, JP1 is disabled. To use this

function, set JP1 to 2-3 On.

Keyboard/Mouse Power On in the

Integrated Peripherals submenu of

the BIOS must be set accordingly.

Refer to chapter 3 for details.

Warning:

1. If JP1 was enabled with a password set in the KB Power

On Password field, and now you wish to disable the

keyboard password function, make sure to set the

Keyboard/Mouse Power On field to Disabled prior to

setting JP1 to disabled. You will not be able to boot up the

system if you fail to do so.

2. The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals submenu. You must type

the correct password to power-on the system.

3. The 5VSB power source of your power supply must

support a minimum of 1.5A.

2-3 On:

Clear CMOS Data

1-2 On: Normal

(default)

8. Type <Y> and press <Enter>.