KYOCERA C4008 사용자 가이드

CAUTION

Avoid placing the copier on or in locations 

which are unstable or not level. Such 

locations may cause the copier to fall down 

or fall over. This type of situation presents a 

danger of personal injury or damage to the 

copier. .............................................................
Avoid locations with humidity or dust and 

dirt. If dust or dirt become attached to the 

power plug, clean the plug to avoid the 

danger of fire or electrical shock. ..................
Avoid locations near radiators, heaters, or 

other heat sources, or locations near 

flammable items, to avoid the danger of fire.
To keep the copier cool and facilitate 

changing of parts and maintenance, allow 

access space as shown below. Leave 

adequate space, especially around the vents, 

to allow air to be properly ventilated out of 

the copier........................................................

Adverse environmental conditions may affect the safe 

operation and performance of the copier. Install in an 

air-conditioned room (recommended room 

temperature: around 68°F (20°C), humidity: around 

65%) and avoid the following locations when selecting 

a site for the copier.

• Avoid locations near a window or with exposure to 

direct sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature 

fluctuations.

• Avoid locations with direct exposure to hot or cold 

air.

• Avoid poorly ventilated locations.
If the floor is delicate against casters, when this 

product is moved after installation, the floor material 

may be damaged.

To prevent the possibility of accidents due to tilting 

the copier body, always turn the desk’s stopper bolts 

until they make firm contact with the floor during 

initial installation or whenever the machine is moved.
To prevent the copier from tipping over, the optional 

caster kit must be installed when the copier is 

installed with an optional Paper Feeder.
During copying, some ozone is released, but the 

amount does not cause any ill effect to one's health. If, 

however, the copier is used over a long period of time 

in a poorly ventilated room or when making an 

extremely large number of copies, the smell may 

become unpleasant. To maintain the appropriate 

environment for copy work, it is suggested that the 

room be properly ventilated.

WARNING

DO NOT use a power supply with a voltage 

other than that specified. Avoid multiple 

connections in the same outlet. These types 

of situations present a danger of fire or 

electrical shock. .............................................
Plug the power cord securely into the outlet. 

If metallic objects come in contact with the 

prongs on the plug, it may cause a fire or 

electric shock. ................................................
Always connect the copier to an outlet with a 

ground connection to avoid the danger of fire 

or electrical shock in case of an electric 

short. If an earth connection is not possible, 

contact your service representative..............
Other precautions

Connect the power plug to the closest outlet possible 

to the copier.
The power supply cord is used as the main disconnect 

device. Ensure that the socket/outlet is 

located/installed near the equipment and is easily 

accessible.

WARNING

Keep the plastic bags that are used with the 

copier away from children. The plastic may 

cling to their nose and mouth causing 

suffocation......................................................

Left:

19

11/16

"

50 cm

Front:

23

5/8

"

60 cm

Right:

19

11/16

"

50 cm

Rear:

11

13/16

"

30 cm