KYOCERA C4008 사용자 가이드
10-1
Section 10 MAINTENANCE AND OPERATION
INFORMATION
Cleaning the original cover
Lift open the original cover. Wipe the back side of the original cover
with a soft cloth dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the original
with a soft cloth dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the original
cover.
Cleaning the platen
Lift open the original cover. Wipe the platen with a soft cloth
dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the platen.
dampened with alcohol or mild detergent.
* Never use thinner or other organic solvents to clean the platen.
* If copies appear soiled, such as black lines appearing on the copy
image, while using the optional Document Processor, the slit
glass (a) is dirty. Wipe the slit glass with a dry cloth or a soft
cloth dampened with alcohol.
glass (a) is dirty. Wipe the slit glass with a dry cloth or a soft
cloth dampened with alcohol.
* Never use water, thinner or organic solvents.
NOTE
When the slit glass becomes dirty, “Clean the slit glass for
original fed from DP.” [“Clean the slit glass for original
fed.”] may appear. In this case, perform the cleaning
operation on the slit glass and then touch the “End” key.
original fed from DP.” [“Clean the slit glass for original
fed.”] may appear. In this case, perform the cleaning
operation on the slit glass and then touch the “End” key.
Inch specifications
Metric specifications
Cleaning the copier
CAUTION
For safety purposes, ALWAYS remove the power
plug from the outlet when performing cleaning
operations.
(a)
Clean the slit glass for original fed from DP.
Open the document processor.
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
If the slit glass is dirty, black line
will appear on the copy.
will appear on the copy.
End
Clean the slit glass for original fed.
Open the document processor.
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
If the slit glass is dirty, black line
will appear on the copy.
will appear on the copy.
End