Maxon Telecom MM-6280IND 사용자 설명서

다운로드
페이지 70
 
 
Extended AT Commands Manual 
Page 51 of 70 
2009-06-25 
Command  TE2 
Æ
 
MT2 
$$REMOTE_CTRL=<VALUE> 
Response 
TE2 
Å
 
MT2 
$$REMOTE_CTRL: <VALUE><.> (USE UPPER CASE – 
must be followed by a ‘full stop’ as noted) 
<result_code> (OK or ERROR) 
 
10.1.2.2. 
Read ALL request 
This command incorporates the VBATT, RSSI, LOCATION & SWVER SMS automated response 
request in one command. 
Table 10-67 Read Command 
Command from SMS phone 
Enter directory number of specific MT2 
Enter message “<remote_ctrl_value>.all” (not case 
sensitive) 
Send message 
Response from MT2 
<directory_number><report><time_date_stamp><remote_ctrl
_value> 
Value 
directory_number: phone number of remote MT2 
report: lists reports of VBATT, RSSI, LOCATION & SWVER 
time_date_stamp: hour day month, 
remote_ctrl_value: default or user defined name 
‘Site name’ is only incorporated within the ‘remote_ctrl_value.all’ request response and not the 
individual request responses that follow. 
 
10.1.2.3. 
VBATT request 
Read supply voltage at remote MT2. 
Table 10-68 Read command 
Command from SMS phone 
Enter directory number of specific MT2 
Enter message “maxon.vbatt” (not case sensitive) 
Send message 
Response from MT2 
<directory_number> VBATT: <time_date_stamp> 
Value 
directory_number: phone number of remote MT2 
time_date_stamp: hour day month 
 
10.1.2.4. 
RSSI request 
Read RSSI at remote MT2. 
Table 10-69 Read command 
Command from SMS phone 
Enter directory number of specific MT2 
Enter message “maxon.rssi” (not case sensitive) 
Send message