IBM SG24-5131-00 사용자 설명서
72
IBM Certification Study Guide AIX HACMP
18.To confirm that the upgrade was a success, type
lscfg -vl pdiskX
where X
is 0,1... for all SSA disks. Check the ROS Level line to see that each disk
has the appropriate microcode level (for the correct microcode level see
the above mentioned web-site).
has the appropriate microcode level (for the correct microcode level see
the above mentioned web-site).
3.3.1.4 Configuring a RAID on SSA Disks
Disk arrays are groups of disk drives that act like one disk as far as the
operating system is concerned, and which provide better availability or
performance characteristics than the individual drives operating alone.
Depending on the particular type of array that is used, it is possible to
optimize availability or performance, or to select a compromise between both.
Disk arrays are groups of disk drives that act like one disk as far as the
operating system is concerned, and which provide better availability or
performance characteristics than the individual drives operating alone.
Depending on the particular type of array that is used, it is possible to
optimize availability or performance, or to select a compromise between both.
The SSA Enhanced Raid adapters only support RAID level 5 (RAID5). RAID0
(Striping) and RAID1 (Mirroring) is not directly supported by the SSA
Enhanced Raid adapters, but with the Logical Volume Manager (LVM), RAID0
and RAID1 can be configured on non-RAID disks.
(Striping) and RAID1 (Mirroring) is not directly supported by the SSA
Enhanced Raid adapters, but with the Logical Volume Manager (LVM), RAID0
and RAID1 can be configured on non-RAID disks.
In order to create a RAID5 on SSA Disks, use the command
smitty ssaraid
.
This will show you the following menu:
Select Add an SSA RAID Array to do the definitions.
3.3.2 SCSI
The following sections contain important information about SCSI: cabling,
connecting RAID subsystems, and adapter SCSI ID and termination change.
connecting RAID subsystems, and adapter SCSI ID and termination change.
SSA RAID Arrays
Move cursor to desired item and press Enter.
List All Defined SSA RAID Arrays
List All Supported SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID Manager
List Status Of All Defined SSA RAID Arrays
List/Identify SSA Physical Disks
List/Delete Old RAID Arrays Recorded in an SSA RAID Manager
Add an SSA RAID Array
Delete an SSA RAID Array
Change/Show Attributes of an SSA RAID Array
Change Member Disks in an SSA RAID Array
Change/Show Use of an SSA Physical Disk
Change Use of Multiple SSA Physical Disks
List All Supported SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID Manager
List Status Of All Defined SSA RAID Arrays
List/Identify SSA Physical Disks
List/Delete Old RAID Arrays Recorded in an SSA RAID Manager
Add an SSA RAID Array
Delete an SSA RAID Array
Change/Show Attributes of an SSA RAID Array
Change Member Disks in an SSA RAID Array
Change/Show Use of an SSA Physical Disk
Change Use of Multiple SSA Physical Disks
F1=Help
F2=Refresh
F3=Cancel
F8=Image
F9=Shell
F10=Exit
Enter=Do