Toshiba U500 사용자 설명서
111
Learning the Basics
Using the optical drive
Removing a disc (slot-type drive)
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
The computer must be powered on to eject a disc.
1
Locate and press the eject button.
The disc partially ejects from the slot.
2
Grasp the disc and remove it from the computer, then place the
disc in its protective cover.
disc in its protective cover.
Inserting an optical disc (tray-type drive)
(Available on certain models)
To insert an optical disc into the drive:
1
Make sure the computer is turned on.
The drive will not open if the computer’s power is off.
2
Make sure the drive’s in-use indicator light is off.
3
Press the drive’s eject button.
The disc tray slides partially out of the drive.
4
Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5
Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in
.
NOTE