Toshiba M100 사용자 설명서

Troubleshooting

Communication 
software can't initialize 
the modem

Make sure the computer's internal modem 
settings are correct. Refer to Phone and Modem 
Options Properties in the Control Panel.

You can hear a dial tone 
but can't make a call

If the call is going through a PBX machine, make 
sure the communication application's tone dial 
detection feature is disabled.

You place a call, but a 
connection can't be 
made

Make sure the settings are correct in your 
communications application.

After making a call you 
can't hear a ring

Make sure the tone or pulse selection in your 
communications application is set correctly.

Communication is cut 
off unexpectedly

The computer will automatically cut off 
communication when connection with the carrier 
is not successful for a set time interval. Try 
lengthening this time interval.

A CONNECT display is 
quickly replaced by NO 
CARRIER

Check the error control setting in your 
communications application.

Character display 
becomes garbled 
during a communication

In data transmission, make sure the parity bit and 
stop bit settings correspond with those of the 
remote computer.
Check the flow control and communication 
protocol.

You cannot receive an 
incoming call

Check the "rings before auto answer" setting in 
your communications application.
If problems persist, contact your dealer.