Canon AXIS 1650 사용자 설명서

AXIS 1650 User’s Manual

13

1. Open a Command Prompt and type:

2. If the host returns

 Reply from 192.168.3.191 ... 

or a similar message, 

the IP address has been set successfully. 
If the host returns Request timed out you need to reboot the print server and 
perform steps 1-2 above again. Rebooting the print server is done by 
disconnecting and then re-connecting the print server’s power adapter.

3. Access the print server’s Web pages ( - See page 41), select 

Settings | Detailed View | TCP/IP and define the Default Router and Subnet 

Mask. Make sure DHCP, BOOTP and RARP are disabled.

You have now set the IP address of the print server. Continue with 

When you execute the ping command for the first time, you will 

experience a significantly longer response time than usual.

Follow the instructions below to set the IP address using ARP. 

1. Type the following commands in the shell window:

2. The host will return

 192.168.3.191 is alive 

or a similar message. This 

indicates that the address has been set and that the communication is 
established.

3. Access the print server’s Web pages ( - See page 41), select 

Settings | Detailed View | TCP/IP and define the Default Router and Subnet 

Mask. Make sure DHCP, BOOTP and RARP are disabled.

•

The ARP command varies between different UNIX systems. Some BSD 
type systems expect the host name and node address in reverse order. 

•

When you execute the ping command for the first time, you may 
experience a significantly longer response time than usual.

arp -s <IP address> <Ethernet address> 

ping -l 479 <IP address>

arp -s 192.168.3.191 00-40-8c-18-1c-f0

ping -l 479 192.168.3.191

arp -s <ip address> <Ethernet address> temp 

ping -l 479 <ip address>

arp -s 192.168.3.191 00:40:8c:18:1c:f0 temp 

ping -l 479 192.168.3.191