Datalogic Scanning C-BOX 150 사용자 설명서
C-BOX 150
2
2.2 OPENING THE DEVICE
To install the C-BOX 150 or during normal maintenance, it is necessary to open it by
unscrewing the four cover screws:
unscrewing the four cover screws:
CAUTION
The C-BOX 150 must be disconnected from the power supply
during this operation.
during this operation.
Figure 2 - Opening the C-BOX 150
It is possible to perform the following operations:
•
Proceed with the cable connections (see paragraph 2.4.2).
•
Mount the C-BOX 150 to a wall or panel.
4