XiNCOM XC-DPG602 사용자 설명서

→

Chapter 8 - Management Assistant

This section is to compliment any SNMP (Simple Network Management Protocol) software installed on your PC. If 

you have SNMP software, you can use a standard MIB II file with the XC-DPG602.

Settings - SNMP

• Contact Person - The name of the person responsible for this device

• Device Name - Enter a name for the XC-DPG602

• Physical Location - The location of the XC-DPG602

Enter the IP address of any targets (PCs running SNMP software) to which you want traps to be sent. All traps are 

level 1.

Email Alert

The email alert feature will send an warning email to the system administrator and inform that one of the WAN 

ports was disconnected.

• Enable – This will enable email alert to send an warning email when WAN port was disconnected.

• Disable – This will disable email alert not to send an warning email when WAN port was

disconnected.

An email address that sends a warning email to a recipient. The warning email will inform the 

recipient if there is any problem on either or both WAN ports. 
Email (SMTP) Server Address

This sets the email server to where the warning email will be sent to.

For example: mail.domain.com.
Email (SMTP) server user name

This authenticates the user name of email sender (optional).
Email (SMTP) server password

This is the user password

XC-DPG602

Twin WAN DNS 

     IP Gateway

• SNMP
• Email Alert
• Syslog
• Upgrade Firmware

39