XiNCOM XC-DPG602 사용자 설명서
→
Chapter 2 - Basic Setup
Overview
Basic setup of your XC-DPG602 wil involve the following steps:
1. Connect the XC-DPG602 to one (1) PC and configure it to your existing LAN.
2. Connecting one or two Broadband Modems to your XC-DPG602.
3. Configuring the XC-DPG602 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG602.
2. Connecting one or two Broadband Modems to your XC-DPG602.
3. Configuring the XC-DPG602 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG602.
Requirements:
• One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
XC-DPG602
Twin WAN DNS
IP Gateway
Chapter Contents
• Overview
• Procedure
• Procedure
1. Configuring your LAN
2. Connecting Broadband Modems
3. Configuring for Internet Access
4. Configuring your LAN PCs
2. Connecting Broadband Modems
3. Configuring for Internet Access
4. Configuring your LAN PCs
TCP/IP Enabled PCs
Broadband Modems
CAT5 Ethernet Cables
9