Zhone Technologies 600 사용자 설명서
Server Cards
3-7
MCC Card
ACS-MCC Card User Screens and Settings
3.3.1.1
C-Port and Numbered Port Configuration (1.1 Version Only)
After establishing the card’s Ethernet parameter settings, configure the card’s ports. From the
ACS-MCC Card Main Screen, press “t” (porT command) to go to its ports. The ACS-MCC
card has three high-speed ports (C1, C2, and C3) and 128 other ports (1 to 128), in addition to
the Ethernet port.
ACS-MCC Card Main Screen, press “t” (porT command) to go to its ports. The ACS-MCC
card has three high-speed ports (C1, C2, and C3) and 128 other ports (1 to 128), in addition to
the Ethernet port.
Table 3-3 shows a typical C-Port Screen. After pressing “t” above, choose the C-ports (C1,
C2, and C3) and 128 other ports (1 to 128) to view this screen.
C2, and C3) and 128 other ports (1 to 128) to view this screen.
Figure 3-3. Typical C-Port Screen
The “less than” (<) and “greater than” (>) keys allow you to scroll through the other numbered
ports associated with this card. Figure 3-4 shows a Typical Numbered Port Screen. Table 3-2
lists the options and defaults for the card ports.
ports associated with this card. Figure 3-4 shows a Typical Numbered Port Screen. Table 3-2
lists the options and defaults for the card ports.
Table 3-3 lists the actions you can perform from either screen. To perform an action, press the
key indicated by the capitol letter on the bottom highlighted line of the screen.
key indicated by the capitol letter on the bottom highlighted line of the screen.
Table 3-4 lists the Port Assignment Screen parameters and available setting. These are also
described in the following paragraphs.
described in the following paragraphs.