Honeywell DCP552 Mark II 사용자 설명서

■

The 

is designed to alternate display of the following alarm codes and

normal display items in one-second intervals on display panel 1 when input

failures or instrument system failures are detected.

In cases of multiple alarm codes, display of the codes is alternated with normal

display items, starting in order from the alarm code with the smallest number.

■

PV range alarm group

: 

to 

Measuring instrument alarm group : 

to 

, and battery voltage drop

(In case of battery voltage drop, 

BAT

LED

of the console is flickered.)

*1

:

When 

is generated, the alarm code stays on and continued

operation is disabled.

*2

:

Data checks performed by 

and 

may fail to detect

corrupted data. When this happens, the alarm can be turned off by

entering normal data.

Alarm

Alarm name

Contents

Countermeasure

code

PV1 overrange

PV1 is more than 110%FS. Check PV1.

PV1 underrange

PV1 is less than –10%FS.

PV2 overrange

PV2 is more than 110%FS. Check PV2

PV2 underrange

PV2 is less than –10%FS.

Board configuration failure Incorrect board configuration Request the repair.

Adjustment value is abnormal.Analog input/output 

Request the repair.

adjustment data were broken.

Setup data is abnormal. Setup data were broken.

Check the setup data, and reset
the data.

Variable parameter is abnormal. Variable parameter were  Check the variable parameter, 

broken.

and reset the data.

PID parameter is abnormal.

PID parameter were broken. Check the PID parameter,

(Fixed command control data is abnormal.)

and reset the data.

Program data is abnormal. Program data were broken. Check the program data, 

and reset the data.

Event configuration data

Event configuration data

Check the event configuration data,

is abnormal.

were broken.

and reset the data.

PROM is abnormal. System program were corrupted. Request the repair.