Acer 08P4100 사용자 설명서
Installing Mylex Disk Array Controller Tape Drivers
5-8
PCI Disk Array Controller Drivers Manual
The tape drive may be placed on any channel. However, if another device
with the same SCSI ID is present on a lower channel, the tape may not
function properly.
with the same SCSI ID is present on a lower channel, the tape may not
function properly.
Mylex Disk Array Controller CD-ROM Drivers
The driver that provides support for CD-ROM devices also gets installed as
a part of the standard controller SCO UNIX driver installation. It is
recommended that a CD-ROM drive installed on any controller channel be
set to SCSI ID 5.
a part of the standard controller SCO UNIX driver installation. It is
recommended that a CD-ROM drive installed on any controller channel be
set to SCSI ID 5.
Use the View/Update Configuration option of the Mylex Disk Array
Controller Configuration Utility to configure the CD-ROM. Save the new
configuration before trying to use the CD-ROM under SCO UNIX.
Controller Configuration Utility to configure the CD-ROM. Save the new
configuration before trying to use the CD-ROM under SCO UNIX.
To install UNIX from a CD-ROM drive, follow the standard SCO UNIX
OpenServer installation instructions for CD-ROM. A screen will prompt you
for the type of installation being performed. You can choose either TAPE
(default), or CD-ROM, etc. From here you can select the SCSI option as
described in the SCO UNIX documentation.
OpenServer installation instructions for CD-ROM. A screen will prompt you
for the type of installation being performed. You can choose either TAPE
(default), or CD-ROM, etc. From here you can select the SCSI option as
described in the SCO UNIX documentation.
If UNIX was not installed from CD-ROM, then a CD-ROM drive may be
configured using the mkdev cdrom command. The LUN of this device should
always be set to 0.
configured using the mkdev cdrom command. The LUN of this device should
always be set to 0.
A CD-ROM drive may be placed on any channel. However, if another non-
disk device with the same ID is present on a lower channel, only the non-
disk device on the lower channel will be accessible.
disk device with the same ID is present on a lower channel, only the non-
disk device on the lower channel will be accessible.