Enterasys Networks 1G58x-09 사용자 설명서
Port Configuration Command Set
Configuring Unknown Destination Address Suppression
4-75
4.3.15.3 clear port unknowndestsuppress
Use this command to reset the suppression of unknown unicast traffic transmission from one or
more ports to the default state of disabled.
more ports to the default state of disabled.
clear port unknowndestsuppress [port-string]
Syntax Description
Command Defaults
If port-string is not specified, status of all ports will be reset.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset unknown destintation address suppression on Fast Ethernet front
panel port 1 to disabled:
panel port 1 to disabled:
port-string
(Optional) Resets status for specific port(s).For a detailed
description of possible port-string values, refer to
description of possible port-string values, refer to
Matrix>clear port unknowndestsuppress fe.0.1