Enterasys Networks 1G58x-09 사용자 설명서

IP Configuration Command Set

Reviewing and Saving the Routing Configuration

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

12-13

12.2.2.3 no ip routing

Use this command to disable IP routing on the device and remove the routing configuration. By
default, IP routing is enabled when interfaces are configured for it as described in

Section 12.2.1

no ip routing

Syntax Description

None.

Command Type

Router command.

Command Mode

Global configuration: Matrix>Router(config)#

Command Defaults

None.

Example

This example shows how to disable IP routing on the device:

Matrix>Router(config)#no ip routing