Enterasys Networks 1G58x-09 사용자 설명서
IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
12-33
12.2.5.6 ip route
Use this command to add or remove a static IP route.
ip route prefix mask {forward-addr | vlan vlan-id} [distance] [permanent] [tag
value]
value]
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command removes the static IP route:
no ip route prefix mask {forward-addr | vlan vlan-id}
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router(config)#
Command Defaults
If permanent and tag are not specified, the route will be set as non-permanent with
no tag assigned.
no tag assigned.
Examples
This example shows how to set IP address 10.1.2.3 as the next hop gateway to destination address
10.0.0.0. The route is assigned a tag of 1:
10.0.0.0. The route is assigned a tag of 1:
prefix
Specifies a destination IP address prefix.
mask
Specifies a destination prefix mask.
forward-addr |
vlan vlan-id
vlan vlan-id
Specifies a forwarding (gateway) IP address or routing
(VLAN) interface ID.
(VLAN) interface ID.
distance
(Optional) Specifies a distance metric for this route. Valid
values are 1 to 255.
values are 1 to 255.
permanent
(Optional) Specifies a permanent route.
tag value
(Optional) Specifies a tag for this route. Valid values are 1
to 4294967295.
to 4294967295.
Matrix>Router(config)#ip route 10.0.0.0 255.0.0.0 10.1.2.3 1