Enterasys Networks 1G58x-09 사용자 설명서
General Configuration Command Set
Setting Basic Device Properties
3-44
Example
This example shows how to enable daylight savings time function:
3.2.2.18 set summertime date
Use this command to configure specific dates to start and stop daylight savings time. These settings
will be non-recurring and will have to be reset annually. Use the set summertime recurring
command to configure recurring summertime that will not have to be reset annually.
will be non-recurring and will have to be reset annually. Use the set summertime recurring
command to configure recurring summertime that will not have to be reset annually.
set summertime date start_month start_date start_year start_hr_min end_month
end_date end_year end_hr_min [offset_minutes]
end_date end_year end_hr_min [offset_minutes]
Syntax Description
Command Defaults
If an offset is not specified, none will be applied.
Matrix> set summertime enable
start_month
Specifies the month of the year to start daylight savings
time.
time.
start_date
Specifies the day of the month to start daylight savings
time.
time.
start_year
Specifies the year to start daylight savings time.
start_hr_min
Specifies the time of day to start daylight savings time.
Format is hh:mm.
Format is hh:mm.
end_month
Specifies the month of the year to end daylight savings
time.
time.
end_date
Specifies the day of the month to end daylight savings
time.
time.
end_year
Specifies the year to end daylight savings time.
end_hr_min
Specifies the time of day to end daylight savings time.
Format is hh:mm.
Format is hh:mm.
offset_minutes
(Optional) Specifies the amount of time in minutes to
offset daylight savings time from the non-daylight
savings time system setting. Valid values are 1 - 1440.
offset daylight savings time from the non-daylight
savings time system setting. Valid values are 1 - 1440.