TP-LINK TL-SG3210 사용자 설명서

 

97

 

System Configuration Commands can be used to configure the system information and system IP 

of the switch, and to reboot and reset the switch, upgrade the switch system and commands used 

for device diagnose, including loopback test and cable test. 

The  system-time manual command is used to configure the system time 
manually. 

system-time manual time 

——

  Set the date and time manually, in the format of MM/DD/YYYY- HH: 

MM: SS. 

Global Configuration Mode 

Configure the system time as 02/14/2012- 12:30:00: 

TL-SG3424(config)# system-time manual 02/14/2012-12:30:00 

The system-time ntp command is used to configure the time zone and the IP 
Address for the NTP Server. The switch will get GMT automatically if it has 
connected to a NTP Server.  

system-time ntp {  timezone  } { ntp-server  } { backup-ntp-server  } 
{ fetching-rate } 

timezone  ——  Your local time-zone, and it ranges from GMT-12 to GMT+13.   

The detailed information that each time-zone means are displayed as follow: 

GMT-12  ——  TimeZone for Eniwetok,Kwajalein.