TP-LINK TL-SG3210 사용자 설명서

 

144

 

tos——  Enter the IP ToS contained in the rule. 

pri  ——  Enter the IP Precedence contained in the rule. 

Global Configuration Mode 

Create an Extended-IP ACL whose ID is 220, and add Rule 10 for it. In the rule, 

the source IP address is 192.168.0.100, the source IP address mask is 

255.255.255.0, the time-range for the rule to take effect is tSeg1, and the 

packets match this rule will be forwarded by the switch: 

TL-SG3424(config)# access-list create 220 

TL-SG3424(config)# access-list extended 220  rule  10 permit sip 

192.168.0.100 smask 255.255.255.0 tseg tSeg1 

The  rule command is used to configure MAC ACL rule. To delete the 

corresponding rule, please use no rule command. 

rule rule-id [ deny | permit ] [[ smac source-mac ] smask source-mac-mask ] 

[[ dmac destination-mac ] dmask destination-mac-mask ] [ vid vlan-id ] [ type 

ethernet-type ] [ pri user-pri ] [ tseg time-segment ] 

no rule rule-id 

rule-id  ——  The rule ID. 

deny  ——  The operation to discard packets. 

permit  ——The operation to forward packets. It is the default value. 

source-mac  ——  The source MAC address contained in the rule. 

source-mac-mask  —— The source MAC address mask. It is required if you 

typed the source MAC address. 

destination-mac  ——  The destination MAC address contained in the rule. 

destination-mac-mask  ——  The destination MAC address mask. It is required 

if you typed the destination MAC address. 

vlan-id  ——  The VLAN ID contained in the rule, ranging from 1 to 4094.