TP-LINK TL-SG3210 사용자 설명서

 

147

 

policy to port 2: 

TL-SG3424(config)# access-list policy action policy1 120 

TL-SG3424(config-action)# redirect interface gigabitEthernet 1/0/2 

The redirect vlan command is used to configure Direction function of policy 

action for specified VLAN. 

redirect vlan vlan-id 

vlan-id  —— The VLAN ID of Redirect. The data packets matching the corresponding 

ACL will be forwarded in the specific VLAN. The VLAN ID ranges from 1 to 

4094. 

Action Configuration Mode 

Edit the actions for policy1. Forward the data packets matching ACL 120 in the 

policy to Fast Ethernet VLAN 1: 

TL-SG3424(config)# access-list policy action policy1 120 

TL-SG3424(config-action)# redirect vlan 1 

The s-condition command is used to configure Stream Condition function of 

policy action. 

s-condition rate rate osd { none | discard } 

rate  ——  The rate of Stream Condition, ranging from 0 to 100000kbps. 

osd  ——  Out of Band disposal of Stream Condition. It is the disposal way of the 

data packets those are transmitted beyond the rate. There are two options, 

none and discard. By default, the option is none.